Automatic flat labeling machine three major development momentum and four adjustment methods

In the pharmaceutical, food and other industries, the use of flat labeling machine has been very extensive, and with the rapid development of labeling technology, from the initial manual labeling to semi-automatic, fully automated labeling, now the market labeling machine last more and more intense competition. Among them, the automatic labeling machine has the advantages of accurate location, good quality, high stability, high efficiency, avoiding the manual labeling inefficiency, skewed attachment, uneven thickness of the glue and wrinkles and a series of problems, effectively reducing the waste of paste, reduce labeling labor costs.

　　Three major development drivers

　　Market demand drives the development of automatic labeling machine. In recent years, with the continuous improvement of people's living standards, pharmaceutical, food, daily necessities and other industries have demand for automatic labeling machine. In this context, automatic flat labeling machine companies must continue to reform and innovation, strengthen corporate responsibility, so as to meet the needs of market development.

　　The diversity of the packaging industry drives the development of automatic labeling machine. Packaging industry is diverse, derived from the packaging production line, assembly line of high demand for equipment. This requires a variety of different functions of fully automatic labeling equipment to achieve the packaging of food, pharmaceutical, daily chemical, chemical, electronic and other industry products.

　　The need for its own development. Different labeling machines can only be applied to the packaging needs of different periods. If the posture of unchanging to face the packaging industry, the result will be eliminated. This also requires labeling machine companies must keep pace with the times and maintain innovation in order to face the increasingly fierce market competition.

　　Four adjustment methods

　　In the use of automatic labeling machine, customers often encounter many failure problems, so how to solve it? The industry said that adjustments can be made in four areas, and if it does not work, you need to find a professional technician for maintenance.

　　Adjustment of the pressure brush device. It is reported that there is practical evidence that the pressure brush across the container overlap gap for: a single pressure brush for 10mm ~ 15mm, combined pressure brush for 5mm ~ 10mm. cleaning brush from the sponge is 1mm ~ 2mm. In addition, the pressure bottle head should be 20mm lower than when there is no bottle.

　　The adjustment of the label box. Label paper in the label box and the gap between the two sides of the pressure bar should be between 0.8mm-1mm, the gap is too large to cause the label paper in the label box shift, a slanted label, the gap is too small will cause the push label is not smooth. In addition, when there is no label, the label pressure plate can be pressed to the front of the label box and equipped with a label, the label hook finger near the label can not be crushed.

　　Adjustment of bottle inlet star wheel, bottle outlet star wheel and bottle inlet screw rod. The adjustment of the incoming star wheel is subject to the pressure head of the labeling machine, first adjust the incoming star wheel, when the pressure head just over the bottle, adjust the incoming star wheel, so that the bottle is located in the middle of the star wheel groove; into the bottle screw rod adjustment is subject to the incoming star wheel, when the bottle is located in the middle of the incoming star wheel groove, adjust the screw rod, so that the screw rod into the bottle side against the bottle but does not produce displacement; outgoing star wheel adjustment: when the pressure head just lift up, adjust the star wheel so that the bottle is located in the middle of the groove of the star wheel.

　　The adjustment of the marking station. It is reported that the scraper plate and rubber roller can not appear in the whole length of the gap, if there is a gap can be adjusted by adjusting the eccentric bolt to adjust the scraper plate. The gap between the standard plate and the rubber roller should be between 0.1mm and 0.2mm, and can be achieved by adjusting the bearing seat on the lower part of the rubber roller, and adjusting the bearing on the upper part of the rubber roller if necessary.